Skip to content
All articles

Article · Hardware · 4 min read

When your POS stops working mid-shift: a quick fix guide

The printer won’t print, the internet is down, the screen froze. Simple checks your staff can do in minutes, and how to keep selling while it’s fixed.

First: keep selling

Before anyone starts fixing, make sure the queue keeps moving. Keep a backup plan at every counter: an order pad, a printed price list or menu, and a way to take payment, such as a DuitNow QR standee. Write down every sale taken by hand so it can be entered into the POS later.

The printer won’t print

This is the most common call, and usually the quickest fix:

  • Check the paper: is the roll empty, or loaded the wrong way round? Thermal paper only prints on one side.
  • Close the cover firmly until it clicks.
  • Check the power light, and switch the printer off and on.
  • Check the cable at both ends: USB to the POS, or the network cable for kitchen printers.
  • If one kitchen printer has stopped but others work, its network cable or switch is the likely cause.
  • Try reprinting the last order from the POS.

The internet is down

Check whether the problem is the line or the POS: can a phone on the shop Wi-Fi open a website? If not, restart the router and wait a few minutes. If you have a 4G or 5G backup router, switch over to it.

Many POS systems can keep taking orders without internet and send them once the connection is back, while card and e-wallet payments may stop. Know how your own system behaves before the day it happens.

The screen froze or the POS won’t start

  • Wait a minute: it may be installing an update or finishing a large report.
  • Close and reopen the POS app.
  • Restart the terminal properly from the menu; hold the power button only if nothing responds.
  • Check the power cable and the plug, especially after a power trip.
  • If a touchscreen doesn’t respond to touch, wipe it clean and dry; oil and water confuse it.

The cash drawer won’t open

The drawer usually opens through the receipt printer, so a printer problem also stops the drawer. Check the drawer cable to the printer. In an emergency, use the drawer key, and make sure the key is kept somewhere the shift manager can find it.

When to call support

If the simple checks don’t help, call your POS support with this ready: which device has the problem, what’s on the screen (a photo of any error helps), what was happening when it stopped, and what you’ve already tried. A good description often means a remote fix in minutes instead of a site visit.

Preventing the next one

  • Keep spare paper rolls at every printer.
  • Put the POS and router on a small UPS, so a short power trip doesn’t stop the counter.
  • Label every cable and keep cables away from water and heat.
  • Keep the POS software updated and its data backed up.
  • Have a backup internet line, and a written page of these checks at the counter.

How Rego Tech can help

We support the systems we install: AutoCount, FeedMe and your POS hardware, with software maintenance, updates and backups, remote help and on-site visits from the team that set it up.

中文摘要

  • 先确保可以继续卖:点单本、价目表、DuitNow QR,手写的单之后再补进 POS。
  • 打印机不印:检查纸卷有没有放反、盖子有没有盖紧、电源、线,然后重印。
  • 没网络:用手机测试是不是线路问题,重启路由器,切换 4G/5G 备用。
  • 屏幕卡住:等一下、重开 POS、正常重启、检查电源线、擦干净触控屏。
  • 钱箱打不开:通常是打印机的问题,紧急时用钥匙。
  • 打给技术支援时:说清楚哪台机、屏幕显示什么(拍照)、已经试过什么。
Next articleAm I eligible for the MSME Digitalization Grant?The eligibility checklist shown in REGO’s September 2023 guide. Check current programme terms before applying.